Your IP : 216.73.216.41
| Current Path : /var/log/ |
|
|
| Current File : //var/log/dmesg |
[ 0.000000] microcode: microcode updated early to revision 0x28, date = 2019-11-12
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.10.0-1127.10.1.el7.x86_64 (mockbuild@kbuilder.bsys.centos.org) (gcc version 4.8.5 20150623 (Red Hat 4.8.5-39) (GCC) ) #1 SMP Wed Jun 3 14:28:03 UTC 2020
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.10.0-1127.10.1.el7.x86_64 root=UUID=4c2c2fa2-2423-4129-ae62-8bc58ade7ec8 ro ”crashkernel=auto crashkernel=auto rd.md.uuid=eb97b0f9:1e2a1dc6:037c7645:d3f1d757 rhgb quiet LANG=en_US.UTF-8
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000099bff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000000099c00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000cd62ffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000cd630000-0x00000000cd636fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000cd637000-0x00000000dd794fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000dd795000-0x00000000dd87bfff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000dd87c000-0x00000000dd8c7fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000dd8c8000-0x00000000dd9fdfff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000dd9fe000-0x00000000df7fefff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000df7ff000-0x00000000df7fffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000021fffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: Supermicro X10SLL-F/X10SLL-F, BIOS 3.0a 12/21/2015
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x220000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CBFFF write-protect
[ 0.000000] CC000-E7FFF uncachable
[ 0.000000] E8000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask 7E00000000 write-back
[ 0.000000] 1 base 0200000000 mask 7FE0000000 write-back
[ 0.000000] 2 base 00E0000000 mask 7FE0000000 uncachable
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] PAT configuration [0-7]: WB WC UC- UC WB WP UC- UC
[ 0.000000] original variable MTRRs
[ 0.000000] reg 0, base: 0GB, range: 8GB, type WB
[ 0.000000] reg 1, base: 8GB, range: 512MB, type WB
[ 0.000000] reg 2, base: 3584MB, range: 512MB, type UC
[ 0.000000] total RAM covered: 8192M
[ 0.000000] Found optimal setting for mtrr clean up
[ 0.000000] gran_size: 64K chunk_size: 8G num_reg: 3 lose cover RAM: 0G
[ 0.000000] New variable MTRRs
[ 0.000000] reg 0, base: 0GB, range: 8GB, type WB
[ 0.000000] reg 1, base: 3584MB, range: 512MB, type UC
[ 0.000000] reg 2, base: 8GB, range: 512MB, type WB
[ 0.000000] e820: update [mem 0xe0000000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0xdf800 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000fd6b0-0x000fd6bf] mapped at [ffffffffff2006b0]
[ 0.000000] Base memory trampoline at [ffff8f0740093000] 93000 size 24576
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] BRK [0x19a073000, 0x19a073fff] PGTABLE
[ 0.000000] BRK [0x19a074000, 0x19a074fff] PGTABLE
[ 0.000000] BRK [0x19a075000, 0x19a075fff] PGTABLE
[ 0.000000] BRK [0x19a076000, 0x19a076fff] PGTABLE
[ 0.000000] BRK [0x19a077000, 0x19a077fff] PGTABLE
[ 0.000000] BRK [0x19a078000, 0x19a078fff] PGTABLE
[ 0.000000] BRK [0x19a079000, 0x19a079fff] PGTABLE
[ 0.000000] BRK [0x19a07a000, 0x19a07afff] PGTABLE
[ 0.000000] BRK [0x19a07b000, 0x19a07bfff] PGTABLE
[ 0.000000] BRK [0x19a07c000, 0x19a07cfff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x35bcb000-0x36dddfff]
[ 0.000000] Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 00000000000f0490 00024 (v02 SUPERM)
[ 0.000000] ACPI: XSDT 00000000dd9d00a0 000BC (v01 SUPERM SMCI--MB 01072009 AMI 00010013)
[ 0.000000] ACPI: FACP 00000000dd9df6d8 0010C (v05 SUPERM SMCI--MB 01072009 AMI 00010013)
[ 0.000000] ACPI: DSDT 00000000dd9d01f0 0F4E2 (v02 SUPERM SMCI--MB 00000000 INTL 20120711)
[ 0.000000] ACPI: FACS 00000000dd9fdf80 00040
[ 0.000000] ACPI: APIC 00000000dd9df7e8 00092 (v03 SUPERM SMCI--MB 01072009 AMI 00010013)
[ 0.000000] ACPI: FPDT 00000000dd9df880 00044 (v01 SUPERM SMCI--MB 01072009 AMI 00010013)
[ 0.000000] ACPI: FIDT 00000000dd9df8c8 0009C (v01 SUPERM SMCI--MB 01072009 AMI 00010013)
[ 0.000000] ACPI: SSDT 00000000dd9df968 00C7D (v02 Ther_R Ther_Rvp 00001000 INTL 20120711)
[ 0.000000] ACPI: SSDT 00000000dd9e05e8 00540 (v02 PmRef Cpu0Ist 00003000 INTL 20051117)
[ 0.000000] ACPI: SSDT 00000000dd9e0b28 00B74 (v02 CpuRef CpuSsdt 00003000 INTL 20051117)
[ 0.000000] ACPI: SSDT 00000000dd9e16a0 002F2 (v02 PmRef Cpu0Tst 00003000 INTL 20051117)
[ 0.000000] ACPI: SSDT 00000000dd9e1998 00348 (v02 PmRef ApTst 00003000 INTL 20051117)
[ 0.000000] ACPI: MCFG 00000000dd9e1ce0 0003C (v01 SUPERM SMCI--MB 01072009 MSFT 00000097)
[ 0.000000] ACPI: HPET 00000000dd9e1d20 00038 (v01 SUPERM SMCI--MB 01072009 AMI. 00000005)
[ 0.000000] ACPI: SSDT 00000000dd9e1d58 00397 (v01 SataRe SataTabl 00001000 INTL 20120711)
[ 0.000000] ACPI: SSDT 00000000dd9e20f0 057F6 (v02 SaSsdt SaSsdt 00003000 INTL 20120711)
[ 0.000000] ACPI: SPMI 00000000dd9e78e8 00040 (v05 A M I OEMSPMI 00000000 AMI. 00000000)
[ 0.000000] ACPI: DMAR 00000000dd9e7928 00080 (v01 INTEL BDW 00000001 INTL 00000001)
[ 0.000000] ACPI: EINJ 00000000dd9e79a8 00130 (v01 AMI AMI EINJ 00000000 00000000)
[ 0.000000] ACPI: ERST 00000000dd9e7ad8 00230 (v01 AMIER AMI ERST 00000000 00000000)
[ 0.000000] ACPI: HEST 00000000dd9e7d08 000A8 (v01 AMI AMI HEST 00000000 00000000)
[ 0.000000] ACPI: BERT 00000000dd9e7db0 00030 (v01 AMI AMI BERT 00000000 00000000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000021fffffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x21ffd9000-0x21fffffff]
[ 0.000000] Reserving 161MB of memory at 688MB for crashkernel (System RAM: 8151MB)
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x21fffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x00098fff]
[ 0.000000] node 0: [mem 0x00100000-0xcd62ffff]
[ 0.000000] node 0: [mem 0xcd637000-0xdd794fff]
[ 0.000000] node 0: [mem 0xdd87c000-0xdd8c7fff]
[ 0.000000] node 0: [mem 0xdf7ff000-0xdf7fffff]
[ 0.000000] node 0: [mem 0x100000000-0x21fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x00001000-0x21fffffff]
[ 0.000000] On node 0 totalpages: 2086771
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3992 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14112 pages used for memmap
[ 0.000000] DMA32 zone: 903131 pages, LIFO batch:31
[ 0.000000] Normal zone: 18432 pages used for memmap
[ 0.000000] Normal zone: 1179648 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x1808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x05] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00099000-0x00099fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009a000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcd630000-0xcd636fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdd795000-0xdd87bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdd8c8000-0xdd9fdfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdd9fe000-0xdf7fefff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdf800000-0xf7ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[ 0.000000] e820: [mem 0xdf800000-0xf7ffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:5120 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] percpu: Embedded 38 pages/cpu s118784 r8192 d28672 u262144
[ 0.000000] pcpu-alloc: s118784 r8192 d28672 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2054142
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.10.0-1127.10.1.el7.x86_64 root=UUID=4c2c2fa2-2423-4129-ae62-8bc58ade7ec8 ro ”crashkernel=auto crashkernel=auto rd.md.uuid=eb97b0f9:1e2a1dc6:037c7645:d3f1d757 rhgb quiet LANG=en_US.UTF-8
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] x86/fpu: xstate_offset[2]: 0240, xstate_sizes[2]: 0100
[ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340 using standard form
[ 0.000000] Memory: 5476620k/8912896k available (7784k kernel code, 565812k absent, 401152k reserved, 5957k data, 1980k init)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] x86/pti: Unmapping kernel while in userspace
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU restricting CPUs from NR_CPUS=5120 to nr_cpu_ids=8.
[ 0.000000] NR_IRQS:327936 nr_irqs:488 0
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 33554432 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 3400.015 MHz processor
[ 0.000026] Calibrating delay loop (skipped), value calculated using timer frequency.. 6800.03 BogoMIPS (lpj=3400015)
[ 0.000028] pid_max: default: 32768 minimum: 301
[ 0.000047] Security Framework initialized
[ 0.000053] SELinux: Initializing.
[ 0.000061] SELinux: Starting in permissive mode
[ 0.000062] Yama: becoming mindful.
[ 0.000463] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.002128] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.002874] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.002882] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.003055] Initializing cgroup subsys memory
[ 0.003058] Initializing cgroup subsys devices
[ 0.003060] Initializing cgroup subsys freezer
[ 0.003061] Initializing cgroup subsys net_cls
[ 0.003062] Initializing cgroup subsys blkio
[ 0.003063] Initializing cgroup subsys perf_event
[ 0.003064] Initializing cgroup subsys hugetlb
[ 0.003065] Initializing cgroup subsys pids
[ 0.003066] Initializing cgroup subsys net_prio
[ 0.003088] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.003089] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.008869] CPU0: Thermal monitoring enabled (TM1)
[ 0.008882] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
[ 0.008882] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0
[ 0.008883] tlb_flushall_shift: 6
[ 0.008902] FEATURE SPEC_CTRL Present
[ 0.008903] FEATURE IBPB_SUPPORT Present
[ 0.008903] Spectre V1 : Mitigation: Load fences, usercopy/swapgs barriers and __user pointer sanitization
[ 0.008905] Spectre V2 : Enabling Indirect Branch Prediction Barrier
[ 0.008981] Spectre V2 : Mitigation: Full retpoline
[ 0.008990] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
[ 0.009005] MDS: Mitigation: Clear CPU buffers
[ 0.009387] Freeing SMP alternatives: 28k freed
[ 0.010741] ACPI: Core revision 20130517
[ 0.020050] ACPI: All ACPI Tables successfully acquired
[ 0.020472] ftrace: allocating 29617 entries in 116 pages
[ 0.038611] DMAR: Host address width 39
[ 0.038613] DMAR: DRHD base: 0x000000fed90000 flags: 0x1
[ 0.038619] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap d2008c20660462 ecap f010da
[ 0.038620] DMAR: RMRR base: 0x000000df64c000 end: 0x000000df65afff
[ 0.038623] DMAR-IR: IOAPIC id 8 under DRHD base 0xfed90000 IOMMU 0
[ 0.038624] DMAR-IR: HPET id 0 under DRHD base 0xfed90000
[ 0.038625] DMAR-IR: x2apic is disabled because BIOS sets x2apic opt out bit.
[ 0.038625] DMAR-IR: Use 'intremap=no_x2apic_optout' to override the BIOS setting.
[ 0.038780] DMAR-IR: Enabled IRQ remapping in xapic mode
[ 0.038781] IRQ remapping doesn't support X2APIC mode, disable x2apic.
[ 0.039209] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.049211] smpboot: CPU0: Intel(R) Xeon(R) CPU E3-1231 v3 @ 3.40GHz (fam: 06, model: 3c, stepping: 03)
[ 0.049221] TSC deadline timer enabled
[ 0.049260] Performance Events: PEBS fmt2+, Haswell events, 16-deep LBR, full-width counters, Intel PMU driver.
[ 0.049267] ... version: 3
[ 0.049267] ... bit width: 48
[ 0.049268] ... generic registers: 4
[ 0.049269] ... value mask: 0000ffffffffffff
[ 0.049270] ... max period: 00007fffffffffff
[ 0.049270] ... fixed-purpose events: 3
[ 0.049271] ... event mask: 000000070000000f
[ 0.058168] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.050305] smpboot: Booting Node 0, Processors #1 #2 #3 #4
[ 0.079501] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details.
[ 0.079559] #5 #6 #7 OK
[ 0.098524] Brought up 8 CPUs
[ 0.098527] smpboot: Max logical packages: 1
[ 0.098528] smpboot: Total of 8 processors activated (54400.24 BogoMIPS)
[ 0.114490] node 0 initialised, 617328 pages in 9ms
[ 0.114620] devtmpfs: initialized
[ 0.114674] x86/mm: Memory block size: 128MB
[ 0.116165] EVM: security.selinux
[ 0.116167] EVM: security.ima
[ 0.116167] EVM: security.capability
[ 0.116232] PM: Registering ACPI NVS region [mem 0xcd630000-0xcd636fff] (28672 bytes)
[ 0.116233] PM: Registering ACPI NVS region [mem 0xdd8c8000-0xdd9fdfff] (1269760 bytes)
[ 0.117121] atomic64 test passed for x86-64 platform with CX8 and with SSE
[ 0.117123] pinctrl core: initialized pinctrl subsystem
[ 0.117164] RTC time: 8:02:15, date: 12/08/21
[ 0.117239] NET: Registered protocol family 16
[ 0.117392] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.117394] ACPI: bus type PCI registered
[ 0.117395] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.117445] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.117447] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ 0.117453] pmd_set_huge: Cannot satisfy [mem 0xf8000000-0xf8200000] with a huge-page mapping due to MTRR override.
[ 0.117527] PCI: Using configuration type 1 for base access
[ 0.117546] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
[ 0.122474] ACPI: Added _OSI(Module Device)
[ 0.122475] ACPI: Added _OSI(Processor Device)
[ 0.122476] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.122477] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.122479] ACPI: Added _OSI(Linux-Dell-Video)
[ 0.123977] ACPI: EC: Look up EC in DSDT
[ 0.125640] ACPI: Executed 6 blocks of module-level executable AML code
[ 0.173607] ACPI: Dynamic OEM Table Load:
[ 0.173612] ACPI: SSDT ffff8f08da0a2800 003D3 (v02 PmRef Cpu0Cst 00003001 INTL 20051117)
[ 0.174160] ACPI: Dynamic OEM Table Load:
[ 0.174164] ACPI: SSDT ffff8f08da09b000 005AA (v02 PmRef ApIst 00003000 INTL 20051117)
[ 0.174647] ACPI: Dynamic OEM Table Load:
[ 0.174650] ACPI: SSDT ffff8f08da092c00 00119 (v02 PmRef ApCst 00003000 INTL 20051117)
[ 0.175926] ACPI: Interpreter enabled
[ 0.175945] ACPI: (supports S0 S4 S5)
[ 0.175946] ACPI: Using IOAPIC for interrupt routing
[ 0.175983] HEST: Table parsing has been initialized.
[ 0.175986] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.176025] ACPI: GPE 0x1E active on init
[ 0.176034] ACPI: Enabled 8 GPEs in block 00 to 3F
[ 0.176356] ACPI: Power Resource [PG00] (on)
[ 0.176568] ACPI: Power Resource [PG01] (on)
[ 0.176774] ACPI: Power Resource [PG02] (on)
[ 0.181257] ACPI: Power Resource [FN00] (off)
[ 0.181303] ACPI: Power Resource [FN01] (off)
[ 0.181348] ACPI: Power Resource [FN02] (off)
[ 0.181394] ACPI: Power Resource [FN03] (off)
[ 0.181438] ACPI: Power Resource [FN04] (off)
[ 0.182026] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[ 0.182039] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.182219] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug SHPCHotplug PME]
[ 0.182314] acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability]
[ 0.182316] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[ 0.182608] PCI host bridge to bus 0000:00
[ 0.182611] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.182612] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.182614] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.182615] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window]
[ 0.182616] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[ 0.182618] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[ 0.182619] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[ 0.182620] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[ 0.182622] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
[ 0.182623] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
[ 0.182624] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xfeafffff window]
[ 0.182626] pci_bus 0000:00: root bus resource [bus 00-3e]
[ 0.182633] pci 0000:00:00.0: [8086:0c08] type 00 class 0x060000
[ 0.182727] pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330
[ 0.182744] pci 0000:00:14.0: reg 0x10: [mem 0xf7220000-0xf722ffff 64bit]
[ 0.182797] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.182843] pci 0000:00:14.0: System wakeup disabled by ACPI
[ 0.182879] pci 0000:00:19.0: [8086:153a] type 00 class 0x020000
[ 0.182894] pci 0000:00:19.0: reg 0x10: [mem 0xf7200000-0xf721ffff]
[ 0.182901] pci 0000:00:19.0: reg 0x14: [mem 0xf7235000-0xf7235fff]
[ 0.182909] pci 0000:00:19.0: reg 0x18: [io 0xf020-0xf03f]
[ 0.182960] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[ 0.183000] pci 0000:00:19.0: System wakeup disabled by ACPI
[ 0.183032] pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320
[ 0.183048] pci 0000:00:1a.0: reg 0x10: [mem 0xf7234000-0xf72343ff]
[ 0.183123] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.183373] pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 0.183406] pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400
[ 0.183470] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.183522] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 0.183557] pci 0000:00:1c.1: [8086:8c12] type 01 class 0x060400
[ 0.183620] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.183668] pci 0000:00:1c.1: System wakeup disabled by ACPI
[ 0.183708] pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320
[ 0.183723] pci 0000:00:1d.0: reg 0x10: [mem 0xf7233000-0xf72333ff]
[ 0.183797] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.183840] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.183874] pci 0000:00:1f.0: [8086:8c52] type 00 class 0x060100
[ 0.184016] pci 0000:00:1f.2: [8086:8c02] type 00 class 0x010601
[ 0.184030] pci 0000:00:1f.2: reg 0x10: [io 0xf070-0xf077]
[ 0.184037] pci 0000:00:1f.2: reg 0x14: [io 0xf060-0xf063]
[ 0.184044] pci 0000:00:1f.2: reg 0x18: [io 0xf050-0xf057]
[ 0.184051] pci 0000:00:1f.2: reg 0x1c: [io 0xf040-0xf043]
[ 0.184058] pci 0000:00:1f.2: reg 0x20: [io 0xf000-0xf01f]
[ 0.184066] pci 0000:00:1f.2: reg 0x24: [mem 0xf7232000-0xf72327ff]
[ 0.184097] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.184152] pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500
[ 0.184166] pci 0000:00:1f.3: reg 0x10: [mem 0xf7231000-0xf72310ff 64bit]
[ 0.184183] pci 0000:00:1f.3: reg 0x20: [io 0x0580-0x059f]
[ 0.184250] pci 0000:00:1f.6: [8086:8c24] type 00 class 0x118000
[ 0.184266] pci 0000:00:1f.6: reg 0x10: [mem 0xf7230000-0xf7230fff 64bit]
[ 0.184437] pci 0000:01:00.0: [1a03:1150] type 01 class 0x060400
[ 0.184562] pci 0000:01:00.0: supports D1 D2
[ 0.184563] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.184610] pci 0000:01:00.0: System wakeup disabled by ACPI
[ 0.187043] pci 0000:00:1c.0: PCI bridge to [bus 01-02]
[ 0.187046] pci 0000:00:1c.0: bridge window [io 0xe000-0xefff]
[ 0.187050] pci 0000:00:1c.0: bridge window [mem 0xf6000000-0xf70fffff]
[ 0.187120] pci 0000:02:00.0: [1a03:2000] type 00 class 0x030000
[ 0.187145] pci 0000:02:00.0: reg 0x10: [mem 0xf6000000-0xf6ffffff]
[ 0.187360] pci 0000:02:00.0: reg 0x14: [mem 0xf7000000-0xf701ffff]
[ 0.187374] pci 0000:02:00.0: reg 0x18: [io 0xe000-0xe07f]
[ 0.187478] pci 0000:02:00.0: supports D1 D2
[ 0.187479] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.187574] pci 0000:01:00.0: PCI bridge to [bus 02]
[ 0.187582] pci 0000:01:00.0: bridge window [io 0xe000-0xefff]
[ 0.187587] pci 0000:01:00.0: bridge window [mem 0xf6000000-0xf70fffff]
[ 0.187690] pci 0000:03:00.0: [8086:1533] type 00 class 0x020000
[ 0.187725] pci 0000:03:00.0: reg 0x10: [mem 0xf7100000-0xf717ffff]
[ 0.187758] pci 0000:03:00.0: reg 0x18: [io 0xd000-0xd01f]
[ 0.187774] pci 0000:03:00.0: reg 0x1c: [mem 0xf7180000-0xf7183fff]
[ 0.187933] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
[ 0.187989] pci 0000:03:00.0: 2.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s x1 link at 0000:00:1c.1 (capable of 7.876 Gb/s with 8 GT/s x1 link)
[ 0.188010] pci 0000:03:00.0: System wakeup disabled by ACPI
[ 0.190069] pci 0000:00:1c.1: PCI bridge to [bus 03]
[ 0.190073] pci 0000:00:1c.1: bridge window [io 0xd000-0xdfff]
[ 0.190077] pci 0000:00:1c.1: bridge window [mem 0xf7100000-0xf71fffff]
[ 0.190730] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.190777] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.190821] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 10 11 12 14 15)
[ 0.190866] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 0.190904] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 10 11 12 14 15)
[ 0.190948] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.190991] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 0.191027] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.191490] vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.191491] vgaarb: loaded
[ 0.191492] vgaarb: bridge control possible 0000:02:00.0
[ 0.191550] SCSI subsystem initialized
[ 0.191570] ACPI: bus type USB registered
[ 0.191581] usbcore: registered new interface driver usbfs
[ 0.191587] usbcore: registered new interface driver hub
[ 0.191606] usbcore: registered new device driver usb
[ 0.191657] EDAC MC: Ver: 3.0.0
[ 0.191757] PCI: Using ACPI for IRQ routing
[ 0.192999] PCI: pci_cache_line_size set to 64 bytes
[ 0.193058] e820: reserve RAM buffer [mem 0x00099c00-0x0009ffff]
[ 0.193059] e820: reserve RAM buffer [mem 0xcd630000-0xcfffffff]
[ 0.193060] e820: reserve RAM buffer [mem 0xdd795000-0xdfffffff]
[ 0.193062] e820: reserve RAM buffer [mem 0xdd8c8000-0xdfffffff]
[ 0.193063] e820: reserve RAM buffer [mem 0xdf800000-0xdfffffff]
[ 0.193146] NetLabel: Initializing
[ 0.193148] NetLabel: domain hash size = 128
[ 0.193148] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.193160] NetLabel: unlabeled traffic allowed by default
[ 0.193216] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.193220] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.195361] amd_nb: Cannot enumerate AMD northbridges
[ 0.195380] Switched to clocksource hpet
[ 0.198739] pnp: PnP ACPI init
[ 0.198748] ACPI: bus type PNP registered
[ 0.198820] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[ 0.198823] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.198885] system 00:01: [io 0x0800-0x087f] has been reserved
[ 0.198887] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.198910] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.198935] system 00:03: [io 0x1854-0x1857] has been reserved
[ 0.198937] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.198991] system 00:04: [io 0x0a00-0x0a1f] has been reserved
[ 0.198993] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.199149] pnp 00:05: [dma 0 disabled]
[ 0.199398] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.199549] pnp 00:06: [dma 0 disabled]
[ 0.199584] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.199619] system 00:07: [io 0x04d0-0x04d1] has been reserved
[ 0.199621] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.199826] system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.199827] system 00:08: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.199830] system 00:08: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.199831] system 00:08: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.199834] system 00:08: [mem 0xf8000000-0xfbffffff] has been reserved
[ 0.199835] system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.199837] system 00:08: [mem 0xfed90000-0xfed93fff] could not be reserved
[ 0.199838] system 00:08: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.199840] system 00:08: [mem 0xff000000-0xffffffff] has been reserved
[ 0.199841] system 00:08: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.199843] system 00:08: [mem 0xf7fe0000-0xf7feffff] has been reserved
[ 0.199845] system 00:08: [mem 0xf7ff0000-0xf7ffffff] has been reserved
[ 0.199846] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.199983] pnp: PnP ACPI: found 9 devices
[ 0.199985] ACPI: bus type PNP unregistered
[ 0.206396] pci 0000:01:00.0: PCI bridge to [bus 02]
[ 0.206400] pci 0000:01:00.0: bridge window [io 0xe000-0xefff]
[ 0.206407] pci 0000:01:00.0: bridge window [mem 0xf6000000-0xf70fffff]
[ 0.206418] pci 0000:00:1c.0: PCI bridge to [bus 01-02]
[ 0.206421] pci 0000:00:1c.0: bridge window [io 0xe000-0xefff]
[ 0.206425] pci 0000:00:1c.0: bridge window [mem 0xf6000000-0xf70fffff]
[ 0.206431] pci 0000:00:1c.1: PCI bridge to [bus 03]
[ 0.206434] pci 0000:00:1c.1: bridge window [io 0xd000-0xdfff]
[ 0.206438] pci 0000:00:1c.1: bridge window [mem 0xf7100000-0xf71fffff]
[ 0.206446] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.206447] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.206449] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.206450] pci_bus 0000:00: resource 7 [mem 0x000cc000-0x000cffff window]
[ 0.206452] pci_bus 0000:00: resource 8 [mem 0x000d0000-0x000d3fff window]
[ 0.206453] pci_bus 0000:00: resource 9 [mem 0x000d4000-0x000d7fff window]
[ 0.206454] pci_bus 0000:00: resource 10 [mem 0x000d8000-0x000dbfff window]
[ 0.206456] pci_bus 0000:00: resource 11 [mem 0x000dc000-0x000dffff window]
[ 0.206457] pci_bus 0000:00: resource 12 [mem 0x000e0000-0x000e3fff window]
[ 0.206458] pci_bus 0000:00: resource 13 [mem 0x000e4000-0x000e7fff window]
[ 0.206460] pci_bus 0000:00: resource 14 [mem 0xe0000000-0xfeafffff window]
[ 0.206461] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
[ 0.206463] pci_bus 0000:01: resource 1 [mem 0xf6000000-0xf70fffff]
[ 0.206464] pci_bus 0000:02: resource 0 [io 0xe000-0xefff]
[ 0.206465] pci_bus 0000:02: resource 1 [mem 0xf6000000-0xf70fffff]
[ 0.206467] pci_bus 0000:03: resource 0 [io 0xd000-0xdfff]
[ 0.206468] pci_bus 0000:03: resource 1 [mem 0xf7100000-0xf71fffff]
[ 0.206488] NET: Registered protocol family 2
[ 0.206627] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.206752] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.206918] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.206933] TCP: reno registered
[ 0.206941] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.206968] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.207021] NET: Registered protocol family 1
[ 0.238473] pci 0000:02:00.0: Boot video device
[ 0.238488] PCI: CLS 64 bytes, default 64
[ 0.238513] Unpacking initramfs...
[ 0.415269] Freeing initrd memory: 18508k freed
[ 0.417029] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.417032] software IO TLB [mem 0xd9795000-0xdd795000] (64MB) mapped at [ffff8f0819795000-ffff8f081d794fff]
[ 0.417097] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer
[ 0.417098] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[ 0.417099] RAPL PMU: hw unit of domain package 2^-14 Joules
[ 0.417100] RAPL PMU: hw unit of domain dram 2^-14 Joules
[ 0.417101] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[ 0.417918] sha1_ssse3: Using AVX2 optimized SHA-1 implementation
[ 0.417965] sha256_ssse3: Using AVX2 optimized SHA-256 implementation
[ 0.418229] futex hash table entries: 2048 (order: 5, 131072 bytes)
[ 0.418256] Initialise system trusted keyring
[ 0.418272] audit: initializing netlink socket (disabled)
[ 0.418280] type=2000 audit(1638950534.362:1): initialized
[ 0.436684] HugeTLB registered 1 GB page size, pre-allocated 0 pages
[ 0.436685] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.437655] zpool: loaded
[ 0.437658] zbud: loaded
[ 0.437877] VFS: Disk quotas dquot_6.5.2
[ 0.437898] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.438079] Key type big_key registered
[ 0.438081] SELinux: Registering netfilter hooks
[ 0.438627] NET: Registered protocol family 38
[ 0.438633] Key type asymmetric registered
[ 0.438635] Asymmetric key parser 'x509' registered
[ 0.438664] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
[ 0.438694] io scheduler noop registered
[ 0.438696] io scheduler deadline registered (default)
[ 0.438714] io scheduler cfq registered
[ 0.438717] io scheduler mq-deadline registered
[ 0.438719] io scheduler kyber registered
[ 0.439023] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.439028] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.439053] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 0.439110] intel_idle: MWAIT substates: 0x42120
[ 0.439111] intel_idle: v0.4.1 model 0x3C
[ 0.439150] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.439227] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input0
[ 0.439229] ACPI: Sleep Button [SLPB]
[ 0.439252] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[ 0.439254] ACPI: Power Button [PWRB]
[ 0.439278] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 0.439279] ACPI: Power Button [PWRF]
[ 0.439516] ACPI: Requesting acpi_cpufreq
[ 0.441528] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.441529] ACPI: Thermal Zone [TZ00] (28 C)
[ 0.441666] thermal LNXTHERM:01: registered as thermal_zone1
[ 0.441667] ACPI: Thermal Zone [TZ01] (30 C)
[ 0.441714] ERST: Error Record Serialization Table (ERST) support is initialized.
[ 0.441716] pstore: Registered erst as persistent store backend
[ 0.441796] GHES: APEI firmware first mode is enabled by APEI bit and WHEA _OSC.
[ 0.441848] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.462627] 00:05: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.483431] 00:06: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 0.483770] Non-volatile memory driver v1.3
[ 0.483794] Linux agpgart interface v0.103
[ 0.483864] crash memory driver: version 1.1
[ 0.483945] rdac: device handler registered
[ 0.483982] hp_sw: device handler registered
[ 0.483984] emc: device handler registered
[ 0.484010] alua: device handler registered
[ 0.484066] libphy: Fixed MDIO Bus: probed
[ 0.484099] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.484102] ehci-pci: EHCI PCI platform driver
[ 0.484187] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 0.484224] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 0.484235] ehci-pci 0000:00:1a.0: debug port 2
[ 0.488136] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 0.488147] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7234000
[ 0.493390] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 0.493417] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 3.10
[ 0.493418] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.493420] usb usb1: Product: EHCI Host Controller
[ 0.493421] usb usb1: Manufacturer: Linux 3.10.0-1127.10.1.el7.x86_64 ehci_hcd
[ 0.493422] usb usb1: SerialNumber: 0000:00:1a.0
[ 0.493503] hub 1-0:1.0: USB hub found
[ 0.493506] hub 1-0:1.0: 2 ports detected
[ 0.493673] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 0.493705] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 0.493720] ehci-pci 0000:00:1d.0: debug port 2
[ 0.497627] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 0.497637] ehci-pci 0000:00:1d.0: irq 22, io mem 0xf7233000
[ 0.503392] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 0.503411] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 3.10
[ 0.503412] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.503413] usb usb2: Product: EHCI Host Controller
[ 0.503415] usb usb2: Manufacturer: Linux 3.10.0-1127.10.1.el7.x86_64 ehci_hcd
[ 0.503416] usb usb2: SerialNumber: 0000:00:1d.0
[ 0.503482] hub 2-0:1.0: USB hub found
[ 0.503485] hub 2-0:1.0: 2 ports detected
[ 0.503570] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.503575] ohci-pci: OHCI PCI platform driver
[ 0.503583] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.503663] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.503695] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[ 0.504770] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000000009810
[ 0.504775] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 0.504800] xhci_hcd 0000:00:14.0: irq 25 for MSI/MSI-X
[ 0.504897] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 3.10
[ 0.504898] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.504899] usb usb3: Product: xHCI Host Controller
[ 0.504901] usb usb3: Manufacturer: Linux 3.10.0-1127.10.1.el7.x86_64 xhci-hcd
[ 0.504902] usb usb3: SerialNumber: 0000:00:14.0
[ 0.504969] hub 3-0:1.0: USB hub found
[ 0.504988] hub 3-0:1.0: 10 ports detected
[ 0.506912] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.506944] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
[ 0.506947] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed
[ 0.506974] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 3.10
[ 0.506975] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.506976] usb usb4: Product: xHCI Host Controller
[ 0.506978] usb usb4: Manufacturer: Linux 3.10.0-1127.10.1.el7.x86_64 xhci-hcd
[ 0.506979] usb usb4: SerialNumber: 0000:00:14.0
[ 0.507049] hub 4-0:1.0: USB hub found
[ 0.507062] hub 4-0:1.0: 2 ports detected
[ 0.507474] usbcore: registered new interface driver usbserial_generic
[ 0.507479] usbserial: USB Serial support registered for generic
[ 0.507512] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 1.417396] tsc: Refined TSC clocksource calibration: 3400.014 MHz
[ 1.658221] i8042: No controller found
[ 1.658312] Switched to clocksource tsc
[ 1.658351] mousedev: PS/2 mouse device common for all mice
[ 1.658505] rtc_cmos 00:02: RTC can wake from S4
[ 1.658607] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 1.658636] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 1.658677] intel_pstate: Intel P-state driver initializing
[ 1.659359] cpuidle: using governor menu
[ 1.660289] hidraw: raw HID events driver (C) Jiri Kosina
[ 1.660607] usbcore: registered new interface driver usbhid
[ 1.660611] usbhid: USB HID core driver
[ 1.660793] drop_monitor: Initializing network drop monitor service
[ 1.660964] TCP: cubic registered
[ 1.660975] Initializing XFRM netlink socket
[ 1.661268] NET: Registered protocol family 10
[ 1.661772] NET: Registered protocol family 17
[ 1.661791] mpls_gso: MPLS GSO support
[ 1.662394] mce: Using 9 MCE banks
[ 1.662484] microcode: sig=0x306c3, pf=0x2, revision=0x28
[ 1.662639] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 1.662936] PM: Hibernation image not present or could not be loaded.
[ 1.662944] Loading compiled-in X.509 certificates
[ 1.663010] Loaded X.509 cert 'CentOS Linux kpatch signing key: ea0413152cde1d98ebdca3fe6f0230904c9ef717'
[ 1.663049] Loaded X.509 cert 'CentOS Linux Driver update signing key: 7f421ee0ab69461574bb358861dbe77762a4201b'
[ 1.664429] Loaded X.509 cert 'CentOS Linux kernel signing key: 746510c92848a8d654bef109d5446f4bfeecb7ca'
[ 1.664470] registered taskstats version 1
[ 1.670896] Key type trusted registered
[ 1.676397] Key type encrypted registered
[ 1.676428] IMA: No TPM chip found, activating TPM-bypass! (rc=-19)
[ 1.677143] Magic number: 1:446:17
[ 1.677284] rtc_cmos 00:02: setting system clock to 2021-12-08 08:02:16 UTC (1638950536)
[ 1.679015] Freeing unused kernel memory: 1980k freed
[ 1.679427] Write protecting the kernel read-only data: 12288k
[ 1.681439] Freeing unused kernel memory: 396k freed
[ 1.683223] Freeing unused kernel memory: 540k freed
[ 1.687664] random: systemd: uninitialized urandom read (16 bytes read)
[ 1.688076] random: systemd: uninitialized urandom read (16 bytes read)
[ 1.688096] random: systemd: uninitialized urandom read (16 bytes read)
[ 1.689237] systemd[1]: systemd 219 running in system mode. (+PAM +AUDIT +SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 -SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
[ 1.689439] systemd[1]: Detected architecture x86-64.
[ 1.689445] systemd[1]: Running in initial RAM disk.
[ 1.689479] systemd[1]: Set hostname to <hulk.velop.no>.
[ 1.717475] random: systemd: uninitialized urandom read (16 bytes read)
[ 1.717494] random: systemd: uninitialized urandom read (16 bytes read)
[ 1.717521] random: systemd: uninitialized urandom read (16 bytes read)
[ 1.717564] random: systemd: uninitialized urandom read (16 bytes read)
[ 1.718071] random: systemd: uninitialized urandom read (16 bytes read)
[ 1.718169] random: systemd: uninitialized urandom read (16 bytes read)
[ 1.718446] random: systemd: uninitialized urandom read (16 bytes read)
[ 1.721824] systemd[1]: Reached target Timers.
[ 1.721861] systemd[1]: Reached target Swap.
[ 1.722029] systemd[1]: Created slice Root Slice.
[ 1.722082] systemd[1]: Listening on Journal Socket.
[ 1.722111] systemd[1]: Listening on udev Control Socket.
[ 1.722174] systemd[1]: Created slice System Slice.
[ 1.722513] systemd[1]: Starting Setup Virtual Console...
[ 1.722908] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[ 1.722922] systemd[1]: Reached target Local File Systems.
[ 1.722938] systemd[1]: Reached target Slices.
[ 1.722972] systemd[1]: Listening on udev Kernel Socket.
[ 1.722981] systemd[1]: Reached target Sockets.
[ 1.723428] systemd[1]: Starting dracut cmdline hook...
[ 1.723806] systemd[1]: Starting Journal Service...
[ 1.724504] systemd[1]: Starting Apply Kernel Variables...
[ 1.724836] systemd[1]: Started Create list of required static device nodes for the current kernel.
[ 1.725437] systemd[1]: Starting Create Static Device Nodes in /dev...
[ 1.725890] systemd[1]: Started Apply Kernel Variables.
[ 1.730745] systemd[1]: Started Create Static Device Nodes in /dev.
[ 1.740241] systemd[1]: Started Journal Service.
[ 1.869381] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 1.870499] usb 2-1: new high-speed USB device number 2 using ehci-pci
[ 1.870510] usb 3-3: new high-speed USB device number 2 using xhci_hcd
[ 1.872522] pps_core: LinuxPPS API ver. 1 registered
[ 1.872524] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 1.874504] PTP clock support registered
[ 1.875921] dca service started, version 1.12.1
[ 1.894151] libata version 3.00 loaded.
[ 1.900861] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.6.0-k
[ 1.900863] igb: Copyright (c) 2007-2014 Intel Corporation.
[ 1.901457] igb 0000:03:00.0: irq 26 for MSI/MSI-X
[ 1.901464] igb 0000:03:00.0: irq 27 for MSI/MSI-X
[ 1.901470] igb 0000:03:00.0: irq 28 for MSI/MSI-X
[ 1.901476] igb 0000:03:00.0: irq 29 for MSI/MSI-X
[ 1.901482] igb 0000:03:00.0: irq 30 for MSI/MSI-X
[ 1.904520] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[ 1.904522] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[ 1.904665] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[ 1.904693] e1000e 0000:00:19.0: irq 31 for MSI/MSI-X
[ 1.927116] [drm] Using P2A bridge for configuration
[ 1.927121] [drm] AST 2400 detected
[ 1.927145] [drm] Analog VGA only
[ 1.927166] [drm] dram MCLK=408 Mhz type=1 bus_width=16 size=01000000
[ 1.927197] [TTM] Zone kernel: Available graphics memory: 3983692 kiB
[ 1.927199] [TTM] Zone dma32: Available graphics memory: 2097152 kiB
[ 1.927200] [TTM] Initializing pool allocator
[ 1.927203] [TTM] Initializing DMA pool allocator
[ 1.928764] pps pps0: new PPS source ptp0
[ 1.928792] igb 0000:03:00.0: added PHC on eth0
[ 1.928793] igb 0000:03:00.0: Intel(R) Gigabit Ethernet Network Connection
[ 1.928795] igb 0000:03:00.0: eth0: (PCIe:2.5Gb/s:Width x1) 00:25:90:47:30:46
[ 1.928879] igb 0000:03:00.0: eth0: PBA No: 011000-000
[ 1.928881] igb 0000:03:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s)
[ 1.932957] fbcon: astdrmfb (fb0) is primary device
[ 1.976663] Console: switching to colour frame buffer device 128x48
[ 1.994157] usb 1-1: New USB device found, idVendor=8087, idProduct=8008, bcdDevice= 0.05
[ 1.994158] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.994539] hub 1-1:1.0: USB hub found
[ 1.994623] ast 0000:02:00.0: fb0: astdrmfb frame buffer device
[ 1.994753] hub 1-1:1.0: 4 ports detected
[ 1.997115] usb 2-1: New USB device found, idVendor=8087, idProduct=8000, bcdDevice= 0.05
[ 1.997117] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.997380] hub 2-1:1.0: USB hub found
[ 1.997632] hub 2-1:1.0: 6 ports detected
[ 1.997737] usb 3-3: New USB device found, idVendor=0557, idProduct=7000, bcdDevice= 0.00
[ 1.997738] usb 3-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.998828] hub 3-3:1.0: USB hub found
[ 1.998953] hub 3-3:1.0: 4 ports detected
[ 2.013114] e1000e 0000:00:19.0 (unregistered net_device) (uninitialized): registered PHC clock
[ 2.014388] [drm] Initialized ast 0.1.0 20120228 for 0000:02:00.0 on minor 0
[ 2.095087] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 00:25:90:47:30:47
[ 2.095090] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
[ 2.095141] e1000e 0000:00:19.0 eth0: MAC: 11, PHY: 12, PBA No: 0100FF-0FF
[ 2.095183] ahci 0000:00:1f.2: version 3.0
[ 2.095392] ahci 0000:00:1f.2: irq 32 for MSI/MSI-X
[ 2.095444] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
[ 2.095448] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst
[ 2.107060] scsi host0: ahci
[ 2.107193] scsi host1: ahci
[ 2.107251] scsi host2: ahci
[ 2.107297] scsi host3: ahci
[ 2.107341] scsi host4: ahci
[ 2.107704] scsi host5: ahci
[ 2.107737] ata1: SATA max UDMA/133 abar m2048@0xf7232000 port 0xf7232100 irq 32
[ 2.107739] ata2: SATA max UDMA/133 abar m2048@0xf7232000 port 0xf7232180 irq 32
[ 2.107742] ata3: SATA max UDMA/133 abar m2048@0xf7232000 port 0xf7232200 irq 32
[ 2.107744] ata4: SATA max UDMA/133 abar m2048@0xf7232000 port 0xf7232280 irq 32
[ 2.107746] ata5: SATA max UDMA/133 abar m2048@0xf7232000 port 0xf7232300 irq 32
[ 2.107749] ata6: SATA max UDMA/133 abar m2048@0xf7232000 port 0xf7232380 irq 32
[ 2.281456] usb 3-3.1: new low-speed USB device number 3 using xhci_hcd
[ 2.387127] usb 3-3.1: New USB device found, idVendor=0557, idProduct=2419, bcdDevice= 1.00
[ 2.387130] usb 3-3.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.393155] input: HID 0557:2419 as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3.1/3-3.1:1.0/input/input3
[ 2.412473] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 2.412495] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 2.412508] ata3: SATA link down (SStatus 0 SControl 300)
[ 2.412527] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.412541] ata4: SATA link down (SStatus 0 SControl 300)
[ 2.412557] ata6: SATA link down (SStatus 0 SControl 300)
[ 2.412775] ata1.00: supports DRM functions and may not be fully accessible
[ 2.412903] ata1.00: READ LOG DMA EXT failed, trying unqueued
[ 2.412965] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
[ 2.412967] ata1.00: ATA-9: Samsung SSD 840 EVO 250GB, EXT0BB6Q, max UDMA/133
[ 2.412968] ata1.00: 488397168 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
[ 2.413213] ata1.00: supports DRM functions and may not be fully accessible
[ 2.413248] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
[ 2.413251] ata1.00: configured for UDMA/133
[ 2.413386] scsi 0:0:0:0: Direct-Access ATA Samsung SSD 840 BB6Q PQ: 0 ANSI: 5
[ 2.413408] ata5.00: ATA-9: ST2000DM001-1ER164, CC26, max UDMA/133
[ 2.413411] ata5.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 2.414002] ata2.00: supports DRM functions and may not be fully accessible
[ 2.414313] ata2.00: disabling queued TRIM support
[ 2.414314] ata2.00: ATA-9: Samsung SSD 850 EVO 250GB, EMT02B6Q, max UDMA/133
[ 2.414315] ata2.00: 488397168 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
[ 2.414337] ata5.00: configured for UDMA/133
[ 2.414863] ata2.00: supports DRM functions and may not be fully accessible
[ 2.415053] ata2.00: disabling queued TRIM support
[ 2.415377] ata2.00: configured for UDMA/133
[ 2.427695] scsi 1:0:0:0: Direct-Access ATA Samsung SSD 850 2B6Q PQ: 0 ANSI: 5
[ 2.439701] scsi 4:0:0:0: Direct-Access ATA ST2000DM001-1ER1 CC26 PQ: 0 ANSI: 5
[ 2.443693] hid-generic 0003:0557:2419.0001: input,hidraw0: USB HID v1.00 Keyboard [HID 0557:2419] on usb-0000:00:14.0-3.1/input0
[ 2.446400] input: HID 0557:2419 as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3.1/3-3.1:1.1/input/input4
[ 2.446545] hid-generic 0003:0557:2419.0002: input,hidraw1: USB HID v1.00 Mouse [HID 0557:2419] on usb-0000:00:14.0-3.1/input1
[ 2.460254] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[ 2.460269] sd 1:0:0:0: [sdb] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[ 2.460284] sd 4:0:0:0: [sdc] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
[ 2.460286] sd 4:0:0:0: [sdc] 4096-byte physical blocks
[ 2.460310] sd 0:0:0:0: [sda] Write Protect is off
[ 2.460312] sd 4:0:0:0: [sdc] Write Protect is off
[ 2.460312] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.460316] sd 4:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 2.460323] sd 1:0:0:0: [sdb] Write Protect is off
[ 2.460326] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 2.460327] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.460330] sd 4:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.460340] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.460667] sdb: sdb1
[ 2.460818] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 2.461315] sda: sda1
[ 2.461455] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.482709] sdc: sdc1
[ 2.483022] sd 4:0:0:0: [sdc] Attached SCSI disk
[ 2.489924] md/raid1:md0: active with 1 out of 2 mirrors
[ 2.494951] md0: detected capacity change from 0 to 250057916416
[ 2.571572] ata1.00: exception Emask 0x0 SAct 0x100000 SErr 0x0 action 0x0
[ 2.571597] ata1.00: irq_stat 0x40000008
[ 2.571609] ata1.00: failed command: READ FPDMA QUEUED
[ 2.571627] ata1.00: cmd 60/08:a0:e0:57:1c/00:00:1d:00:00/40 tag 20 ncq 4096 in
res 41/40:00:e0:57:1c/00:00:1d:00:00/1d Emask 0x409 (media error) <F>
[ 2.571666] ata1.00: status: { DRDY ERR }
[ 2.571678] ata1.00: error: { UNC }
[ 2.571813] ata1.00: supports DRM functions and may not be fully accessible
[ 2.571845] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
[ 2.572009] ata1.00: supports DRM functions and may not be fully accessible
[ 2.572047] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
[ 2.572050] ata1.00: configured for UDMA/133
[ 2.572066] sd 0:0:0:0: [sda] tag#20 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE cmd_age=0s
[ 2.572068] sd 0:0:0:0: [sda] tag#20 Sense Key : Medium Error [current] [descriptor]
[ 2.572071] sd 0:0:0:0: [sda] tag#20 Add. Sense: Unrecovered read error - auto reallocate failed
[ 2.572073] sd 0:0:0:0: [sda] tag#20 CDB: Read(10) 28 00 1d 1c 57 e0 00 00 08 00
[ 2.572075] blk_update_request: I/O error, dev sda, sector 488396768
[ 2.572096] ata1: EH complete
[ 2.574475] random: fast init done
[ 2.655848] ata1.00: exception Emask 0x0 SAct 0x2000000 SErr 0x0 action 0x0
[ 2.655874] ata1.00: irq_stat 0x40000008
[ 2.655887] ata1.00: failed command: READ FPDMA QUEUED
[ 2.655905] ata1.00: cmd 60/08:c8:e0:57:1c/00:00:1d:00:00/40 tag 25 ncq 4096 in
res 41/40:00:e0:57:1c/00:00:1d:00:00/1d Emask 0x409 (media error) <F>
[ 2.655946] ata1.00: status: { DRDY ERR }
[ 2.655957] ata1.00: error: { UNC }
[ 2.656202] ata1.00: supports DRM functions and may not be fully accessible
[ 2.656283] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
[ 2.656459] ata1.00: supports DRM functions and may not be fully accessible
[ 2.656513] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
[ 2.656517] ata1.00: configured for UDMA/133
[ 2.656540] sd 0:0:0:0: [sda] tag#25 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE cmd_age=0s
[ 2.656544] sd 0:0:0:0: [sda] tag#25 Sense Key : Medium Error [current] [descriptor]
[ 2.656547] sd 0:0:0:0: [sda] tag#25 Add. Sense: Unrecovered read error - auto reallocate failed
[ 2.656550] sd 0:0:0:0: [sda] tag#25 CDB: Read(10) 28 00 1d 1c 57 e0 00 00 08 00
[ 2.656552] blk_update_request: I/O error, dev sda, sector 488396768
[ 2.656582] Buffer I/O error on dev sda, logical block 61049596, async page read
[ 2.656622] ata1: EH complete
[ 2.782742] ata1.00: exception Emask 0x0 SAct 0x40000000 SErr 0x0 action 0x0
[ 2.782785] ata1.00: irq_stat 0x40000008
[ 2.782807] ata1.00: failed command: READ FPDMA QUEUED
[ 2.782839] ata1.00: cmd 60/01:f0:e0:57:1c/00:00:1d:00:00/40 tag 30 ncq 512 in
res 41/40:00:e0:57:1c/00:00:1d:00:00/1d Emask 0x409 (media error) <F>
[ 2.782908] ata1.00: status: { DRDY ERR }
[ 2.782930] ata1.00: error: { UNC }
[ 2.783198] ata1.00: supports DRM functions and may not be fully accessible
[ 2.783292] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
[ 2.783502] ata1.00: supports DRM functions and may not be fully accessible
[ 2.783567] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
[ 2.783572] ata1.00: configured for UDMA/133
[ 2.783601] sd 0:0:0:0: [sda] tag#30 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE cmd_age=0s
[ 2.783608] sd 0:0:0:0: [sda] tag#30 Sense Key : Medium Error [current] [descriptor]
[ 2.783614] sd 0:0:0:0: [sda] tag#30 Add. Sense: Unrecovered read error - auto reallocate failed
[ 2.783621] sd 0:0:0:0: [sda] tag#30 CDB: Read(10) 28 00 1d 1c 57 e0 00 00 01 00
[ 2.783624] blk_update_request: I/O error, dev sda, sector 488396768
[ 2.783700] ata1: EH complete
[ 2.884735] ata1.00: exception Emask 0x0 SAct 0x80000 SErr 0x0 action 0x0
[ 2.884777] ata1.00: irq_stat 0x40000008
[ 2.884799] ata1.00: failed command: READ FPDMA QUEUED
[ 2.884831] ata1.00: cmd 60/01:98:e0:57:1c/00:00:1d:00:00/40 tag 19 ncq 512 in
res 41/40:00:e0:57:1c/00:00:1d:00:00/1d Emask 0x409 (media error) <F>
[ 2.884903] ata1.00: status: { DRDY ERR }
[ 2.884925] ata1.00: error: { UNC }
[ 2.885151] ata1.00: supports DRM functions and may not be fully accessible
[ 2.885204] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
[ 2.885464] ata1.00: supports DRM functions and may not be fully accessible
[ 2.885526] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
[ 2.885532] ata1.00: configured for UDMA/133
[ 2.885563] sd 0:0:0:0: [sda] tag#19 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE cmd_age=0s
[ 2.885570] sd 0:0:0:0: [sda] tag#19 Sense Key : Medium Error [current] [descriptor]
[ 2.885576] sd 0:0:0:0: [sda] tag#19 Add. Sense: Unrecovered read error - auto reallocate failed
[ 2.885582] sd 0:0:0:0: [sda] tag#19 CDB: Read(10) 28 00 1d 1c 57 e0 00 00 01 00
[ 2.885586] blk_update_request: I/O error, dev sda, sector 488396768
[ 2.885657] ata1: EH complete
[ 2.981821] ata1.00: exception Emask 0x0 SAct 0x8000000 SErr 0x0 action 0x0
[ 2.981872] ata1.00: irq_stat 0x40000008
[ 2.981900] ata1.00: failed command: READ FPDMA QUEUED
[ 2.981938] ata1.00: cmd 60/01:d8:e0:57:1c/00:00:1d:00:00/40 tag 27 ncq 512 in
res 41/40:00:e0:57:1c/00:00:1d:00:00/1d Emask 0x409 (media error) <F>
[ 2.982025] ata1.00: status: { DRDY ERR }
[ 2.982052] ata1.00: error: { UNC }
[ 2.982242] ata1.00: supports DRM functions and may not be fully accessible
[ 2.982293] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
[ 2.982512] ata1.00: supports DRM functions and may not be fully accessible
[ 2.982588] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
[ 2.982596] ata1.00: configured for UDMA/133
[ 2.982631] sd 0:0:0:0: [sda] tag#27 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE cmd_age=0s
[ 2.982638] sd 0:0:0:0: [sda] tag#27 Sense Key : Medium Error [current] [descriptor]
[ 2.982644] sd 0:0:0:0: [sda] tag#27 Add. Sense: Unrecovered read error - auto reallocate failed
[ 2.982652] sd 0:0:0:0: [sda] tag#27 CDB: Read(10) 28 00 1d 1c 57 e0 00 00 01 00
[ 2.982657] blk_update_request: I/O error, dev sda, sector 488396768
[ 2.982747] ata1: EH complete
[ 3.125778] ata1.00: exception Emask 0x0 SAct 0x10000000 SErr 0x0 action 0x0
[ 3.125828] ata1.00: irq_stat 0x40000008
[ 3.125856] ata1.00: failed command: READ FPDMA QUEUED
[ 3.125893] ata1.00: cmd 60/01:e0:e0:57:1c/00:00:1d:00:00/40 tag 28 ncq 512 in
res 41/40:00:e0:57:1c/00:00:1d:00:00/1d Emask 0x409 (media error) <F>
[ 3.125978] ata1.00: status: { DRDY ERR }
[ 3.127239] ata1.00: error: { UNC }
[ 3.128712] ata1.00: supports DRM functions and may not be fully accessible
[ 3.128769] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
[ 3.128955] ata1.00: supports DRM functions and may not be fully accessible
[ 3.129003] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
[ 3.129007] ata1.00: configured for UDMA/133
[ 3.129034] sd 0:0:0:0: [sda] tag#28 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE cmd_age=0s
[ 3.129038] sd 0:0:0:0: [sda] tag#28 Sense Key : Medium Error [current] [descriptor]
[ 3.129043] sd 0:0:0:0: [sda] tag#28 Add. Sense: Unrecovered read error - auto reallocate failed
[ 3.129047] sd 0:0:0:0: [sda] tag#28 CDB: Read(10) 28 00 1d 1c 57 e0 00 00 01 00
[ 3.129051] blk_update_request: I/O error, dev sda, sector 488396768
[ 3.130270] ata1: EH complete
[ 3.193696] ata1.00: exception Emask 0x0 SAct 0x8 SErr 0x0 action 0x0
[ 3.194771] ata1.00: irq_stat 0x40000008
[ 3.195786] ata1.00: failed command: READ FPDMA QUEUED
[ 3.196858] ata1.00: cmd 60/01:18:e0:57:1c/00:00:1d:00:00/40 tag 3 ncq 512 in
res 41/40:00:e0:57:1c/00:00:1d:00:00/1d Emask 0x409 (media error) <F>
[ 3.198903] ata1.00: status: { DRDY ERR }
[ 3.199936] ata1.00: error: { UNC }
[ 3.201099] ata1.00: supports DRM functions and may not be fully accessible
[ 3.201153] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
[ 3.201315] ata1.00: supports DRM functions and may not be fully accessible
[ 3.201362] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
[ 3.201366] ata1.00: configured for UDMA/133
[ 3.201399] sd 0:0:0:0: [sda] tag#3 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE cmd_age=0s
[ 3.201405] sd 0:0:0:0: [sda] tag#3 Sense Key : Medium Error [current] [descriptor]
[ 3.201410] sd 0:0:0:0: [sda] tag#3 Add. Sense: Unrecovered read error - auto reallocate failed
[ 3.201415] sd 0:0:0:0: [sda] tag#3 CDB: Read(10) 28 00 1d 1c 57 e0 00 00 01 00
[ 3.201419] blk_update_request: I/O error, dev sda, sector 488396768
[ 3.202762] ata1: EH complete
[ 3.296677] ata1.00: exception Emask 0x0 SAct 0x1000000 SErr 0x0 action 0x0
[ 3.297253] ata1.00: irq_stat 0x40000008
[ 3.297819] ata1.00: failed command: READ FPDMA QUEUED
[ 3.298704] ata1.00: cmd 60/01:c0:e0:57:1c/00:00:1d:00:00/40 tag 24 ncq 512 in
res 41/40:00:e0:57:1c/00:00:1d:00:00/1d Emask 0x409 (media error) <F>
[ 3.300535] ata1.00: status: { DRDY ERR }
[ 3.301453] ata1.00: error: { UNC }
[ 3.302593] ata1.00: supports DRM functions and may not be fully accessible
[ 3.302730] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
[ 3.302894] ata1.00: supports DRM functions and may not be fully accessible
[ 3.302939] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
[ 3.302942] ata1.00: configured for UDMA/133
[ 3.302962] sd 0:0:0:0: [sda] tag#24 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE cmd_age=0s
[ 3.302965] sd 0:0:0:0: [sda] tag#24 Sense Key : Medium Error [current] [descriptor]
[ 3.302969] sd 0:0:0:0: [sda] tag#24 Add. Sense: Unrecovered read error - auto reallocate failed
[ 3.302972] sd 0:0:0:0: [sda] tag#24 CDB: Read(10) 28 00 1d 1c 57 e0 00 00 01 00
[ 3.302974] blk_update_request: I/O error, dev sda, sector 488396768
[ 3.303898] ata1: EH complete
[ 3.437697] ata1.00: exception Emask 0x0 SAct 0x1000000 SErr 0x0 action 0x0
[ 3.438682] ata1.00: irq_stat 0x40000008
[ 3.439606] ata1.00: failed command: READ FPDMA QUEUED
[ 3.440519] ata1.00: cmd 60/01:c0:e0:57:1c/00:00:1d:00:00/40 tag 24 ncq 512 in
res 41/40:00:e0:57:1c/00:00:1d:00:00/1d Emask 0x409 (media error) <F>
[ 3.442344] ata1.00: status: { DRDY ERR }
[ 3.443260] ata1.00: error: { UNC }
[ 3.444314] ata1.00: supports DRM functions and may not be fully accessible
[ 3.444369] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
[ 3.444554] ata1.00: supports DRM functions and may not be fully accessible
[ 3.444594] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
[ 3.444597] ata1.00: configured for UDMA/133
[ 3.444619] sd 0:0:0:0: [sda] tag#24 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE cmd_age=0s
[ 3.444623] sd 0:0:0:0: [sda] tag#24 Sense Key : Medium Error [current] [descriptor]
[ 3.444626] sd 0:0:0:0: [sda] tag#24 Add. Sense: Unrecovered read error - auto reallocate failed
[ 3.444630] sd 0:0:0:0: [sda] tag#24 CDB: Read(10) 28 00 1d 1c 57 e0 00 00 01 00
[ 3.444632] blk_update_request: I/O error, dev sda, sector 488396768
[ 3.445559] ata1: EH complete
[ 3.540923] ata1.00: exception Emask 0x0 SAct 0x40000000 SErr 0x0 action 0x0
[ 3.540938] ata1.00: irq_stat 0x40000008
[ 3.540942] ata1.00: failed command: READ FPDMA QUEUED
[ 3.540963] ata1.00: cmd 60/01:f0:e0:57:1c/00:00:1d:00:00/40 tag 30 ncq 512 in
res 41/40:00:e0:57:1c/00:00:1d:00:00/1d Emask 0x409 (media error) <F>
[ 3.540966] ata1.00: status: { DRDY ERR }
[ 3.540981] ata1.00: error: { UNC }
[ 3.541383] ata1.00: supports DRM functions and may not be fully accessible
[ 3.541688] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
[ 3.542203] ata1.00: supports DRM functions and may not be fully accessible
[ 3.542425] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
[ 3.542446] ata1.00: configured for UDMA/133
[ 3.542578] sd 0:0:0:0: [sda] tag#30 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE cmd_age=0s
[ 3.542597] sd 0:0:0:0: [sda] tag#30 Sense Key : Medium Error [current] [descriptor]
[ 3.542600] sd 0:0:0:0: [sda] tag#30 Add. Sense: Unrecovered read error - auto reallocate failed
[ 3.542619] sd 0:0:0:0: [sda] tag#30 CDB: Read(10) 28 00 1d 1c 57 e0 00 00 01 00
[ 3.542641] blk_update_request: I/O error, dev sda, sector 488396768
[ 3.542686] ata1: EH complete
[ 3.647858] ata1.00: exception Emask 0x0 SAct 0x200000 SErr 0x0 action 0x0
[ 3.648482] ata1.00: irq_stat 0x40000008
[ 3.649078] ata1.00: failed command: READ FPDMA QUEUED
[ 3.649636] ata1.00: cmd 60/01:a8:e0:57:1c/00:00:1d:00:00/40 tag 21 ncq 512 in
res 41/40:00:e0:57:1c/00:00:1d:00:00/1d Emask 0x409 (media error) <F>
[ 3.651399] ata1.00: status: { DRDY ERR }
[ 3.652316] ata1.00: error: { UNC }
[ 3.653426] ata1.00: supports DRM functions and may not be fully accessible
[ 3.653570] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
[ 3.653753] ata1.00: supports DRM functions and may not be fully accessible
[ 3.653798] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
[ 3.653801] ata1.00: configured for UDMA/133
[ 3.653827] ata1: EH complete
[ 3.670789] ata1.00: exception Emask 0x0 SAct 0x80 SErr 0x0 action 0x0
[ 3.671411] ata1.00: irq_stat 0x40000008
[ 3.672000] ata1.00: failed command: READ FPDMA QUEUED
[ 3.672580] ata1.00: cmd 60/01:38:e0:57:1c/00:00:1d:00:00/40 tag 7 ncq 512 in
res 41/40:00:e0:57:1c/00:00:1d:00:00/1d Emask 0x409 (media error) <F>
[ 3.673646] ata1.00: status: { DRDY ERR }
[ 3.674170] ata1.00: error: { UNC }
[ 3.674836] ata1.00: supports DRM functions and may not be fully accessible
[ 3.674874] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
[ 3.675036] ata1.00: supports DRM functions and may not be fully accessible
[ 3.675078] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
[ 3.675079] ata1.00: configured for UDMA/133
[ 3.675099] ata1: EH complete
[ 3.725601] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: (null)
[ 3.921204] systemd-journald[132]: Received SIGTERM from PID 1 (systemd).
[ 3.972588] SELinux: Disabled at runtime.
[ 3.972600] SELinux: Unregistering netfilter hooks
[ 4.016396] type=1404 audit(1638950538.839:2): selinux=0 auid=4294967295 ses=4294967295
[ 4.024604] systemd[1]: RTC configured in localtime, applying delta of 60 minutes to system time.
[ 4.039625] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 4.039661] systemd[1]: Inserted module 'ip_tables'
[ 4.177882] EXT4-fs (md0): re-mounted. Opts: usrjquota=quota.user,jqfmt=vfsv0
[ 4.185062] systemd-journald[549]: Received request to flush runtime journal from PID 1
[ 4.442015] random: crng init done
[ 4.580630] EDAC MC0: Giving out device to 'ie31200_edac' 'IE31200': DEV 0000:00:00.0
[ 4.590217] IPMI message handler: version 39.2
[ 4.591441] ipmi device interface
[ 4.598505] ipmi_si: IPMI System Interface driver
[ 4.598526] ipmi_si dmi-ipmi-si.0: probing via SMBIOS
[ 4.598529] ipmi_platform: ipmi_si: SMBIOS: io 0xca2 regsize 1 spacing 1 irq 0
[ 4.598530] ipmi_si: Adding SMBIOS-specified kcs state machine
[ 4.598548] ipmi_si IPI0001:00: probing via ACPI
[ 4.598567] ipmi_si IPI0001:00: [io 0x0ca2] regsize 1 spacing 1 irq 0
[ 4.598569] ipmi_si dmi-ipmi-si.0: Removing SMBIOS-specified kcs state machine in favor of ACPI
[ 4.607379] ipmi_si: Adding ACPI-specified kcs state machine
[ 4.607419] ipmi_si: Trying ACPI-specified kcs state machine at i/o address 0xca2, slave address 0x0, irq 0
[ 4.608156] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 4.608207] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 4.608241] sd 4:0:0:0: Attached scsi generic sg2 type 0
[ 4.614827] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ 4.615086] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[ 4.621041] cryptd: max_cpu_qlen set to 1000
[ 4.633004] AVX2 version of gcm_enc/dec engaged.
[ 4.633008] AES CTR mode by8 optimization enabled
[ 4.635765] alg: No test for __gcm-aes-aesni (__driver-gcm-aes-aesni)
[ 4.635790] alg: No test for __generic-gcm-aes-aesni (__driver-generic-gcm-aes-aesni)
[ 4.647569] ata1.00: exception Emask 0x0 SAct 0x80000 SErr 0x0 action 0x0
[ 4.648593] ata1.00: irq_stat 0x40000008
[ 4.649587] ata1.00: failed command: READ FPDMA QUEUED
[ 4.650531] ata1.00: cmd 60/08:98:e0:57:1c/00:00:1d:00:00/40 tag 19 ncq 4096 in
res 41/40:00:e0:57:1c/00:00:1d:00:00/1d Emask 0x409 (media error) <F>
[ 4.652454] ata1.00: status: { DRDY ERR }
[ 4.653412] ata1.00: error: { UNC }
[ 4.654495] ata1.00: supports DRM functions and may not be fully accessible
[ 4.654551] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
[ 4.654687] ata1.00: supports DRM functions and may not be fully accessible
[ 4.654720] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
[ 4.654723] ata1.00: configured for UDMA/133
[ 4.654740] ata1: EH complete
[ 4.657380] ipmi_si IPI0001:00: The BMC does not support clearing the recv irq bit, compensating, but the BMC needs to be fixed.
[ 4.671892] ata1.00: exception Emask 0x0 SAct 0x800000 SErr 0x0 action 0x0
[ 4.672915] ata1.00: irq_stat 0x40000008
[ 4.673901] ata1.00: failed command: READ FPDMA QUEUED
[ 4.674948] ata1.00: cmd 60/08:b8:e0:57:1c/00:00:1d:00:00/40 tag 23 ncq 4096 in
res 41/40:00:e0:57:1c/00:00:1d:00:00/1d Emask 0x409 (media error) <F>
[ 4.677045] ata1.00: status: { DRDY ERR }
[ 4.678088] ata1.00: error: { UNC }
[ 4.679253] ata1.00: supports DRM functions and may not be fully accessible
[ 4.679292] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
[ 4.679450] ata1.00: supports DRM functions and may not be fully accessible
[ 4.679493] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
[ 4.679496] ata1.00: configured for UDMA/133
[ 4.679514] Buffer I/O error on dev sda, logical block 61049596, async page read
[ 4.680538] ata1: EH complete
[ 4.681667] ipmi_si IPI0001:00: Found new BMC (man_id: 0x002a7c, prod_id: 0x0801, dev_id: 0x20)
[ 4.689361] iTCO_vendor_support: vendor-support=0
[ 4.690157] ipmi_si IPI0001:00: IPMI kcs interface initialized
[ 4.690774] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 4.690844] iTCO_wdt: unable to reset NO_REBOOT flag, device disabled by hardware/BIOS
[ 4.693027] ipmi_ssif: IPMI SSIF Interface driver
[ 4.700129] intel_rapl: Found RAPL domain package
[ 4.700134] intel_rapl: Found RAPL domain core
[ 4.700138] intel_rapl: Found RAPL domain dram
[ 4.737891] ata1.00: exception Emask 0x0 SAct 0x38000 SErr 0x0 action 0x0
[ 4.737891] ata1.00: irq_stat 0x40000008
[ 4.737893] ata1.00: failed command: READ FPDMA QUEUED
[ 4.737897] ata1.00: cmd 60/01:78:e0:57:1c/00:00:1d:00:00/40 tag 15 ncq 512 in
res 41/40:00:e0:57:1c/00:00:1d:00:00/1d Emask 0x409 (media error) <F>
[ 4.737897] ata1.00: status: { DRDY ERR }
[ 4.737898] ata1.00: error: { UNC }
[ 4.738138] ata1.00: supports DRM functions and may not be fully accessible
[ 4.738456] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
[ 4.738756] ata1.00: supports DRM functions and may not be fully accessible
[ 4.738911] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
[ 4.738913] ata1.00: configured for UDMA/133
[ 4.739002] ata1: EH complete
[ 4.867728] ata1.00: exception Emask 0x0 SAct 0x80040 SErr 0x0 action 0x0
[ 4.868297] ata1.00: irq_stat 0x40000008
[ 4.868868] ata1.00: failed command: READ FPDMA QUEUED
[ 4.869412] ata1.00: cmd 60/00:30:00:57:1c/01:00:1d:00:00/40 tag 6 ncq 131072 in
res 41/40:00:00:57:1c/00:00:1d:00:00/1d Emask 0x409 (media error) <F>
[ 4.870470] ata1.00: status: { DRDY ERR }
[ 4.871017] ata1.00: error: { UNC }
[ 4.871707] ata1.00: supports DRM functions and may not be fully accessible
[ 4.871771] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
[ 4.871917] ata1.00: supports DRM functions and may not be fully accessible
[ 4.871947] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
[ 4.871949] ata1.00: configured for UDMA/133
[ 4.871974] ata1: EH complete
[ 4.969624] ata1.00: exception Emask 0x0 SAct 0x6000000 SErr 0x0 action 0x0
[ 4.970182] ata1.00: irq_stat 0x40000008
[ 4.970730] ata1.00: failed command: READ FPDMA QUEUED
[ 4.971260] ata1.00: cmd 60/00:c8:00:57:1c/01:00:1d:00:00/40 tag 25 ncq 131072 in
res 41/40:00:00:57:1c/00:00:1d:00:00/1d Emask 0x409 (media error) <F>
[ 4.972299] ata1.00: status: { DRDY ERR }
[ 4.972835] ata1.00: error: { UNC }
[ 4.973469] ata1.00: supports DRM functions and may not be fully accessible
[ 4.973504] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
[ 4.973640] ata1.00: supports DRM functions and may not be fully accessible
[ 4.973669] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
[ 4.973671] ata1.00: configured for UDMA/133
[ 4.975388] ata1: EH complete
[ 5.041596] ata1.00: exception Emask 0x0 SAct 0x2400 SErr 0x0 action 0x0
[ 5.042151] ata1.00: irq_stat 0x40000008
[ 5.042701] ata1.00: failed command: READ FPDMA QUEUED
[ 5.043225] ata1.00: cmd 60/01:50:e0:57:1c/00:00:1d:00:00/40 tag 10 ncq 512 in
res 41/40:00:e0:57:1c/00:00:1d:00:00/1d Emask 0x409 (media error) <F>
[ 5.044276] ata1.00: status: { DRDY ERR }
[ 5.044796] ata1.00: error: { UNC }
[ 5.045452] ata1.00: supports DRM functions and may not be fully accessible
[ 5.045498] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
[ 5.045642] ata1.00: supports DRM functions and may not be fully accessible
[ 5.045678] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
[ 5.045679] ata1.00: configured for UDMA/133
[ 5.045691] ata1: EH complete
[ 5.155635] ata1.00: exception Emask 0x0 SAct 0x2000 SErr 0x0 action 0x0
[ 5.156205] ata1.00: irq_stat 0x40000008
[ 5.156762] ata1.00: failed command: READ FPDMA QUEUED
[ 5.157302] ata1.00: cmd 60/01:68:e0:57:1c/00:00:1d:00:00/40 tag 13 ncq 512 in
res 41/40:00:e0:57:1c/00:00:1d:00:00/1d Emask 0x409 (media error) <F>
[ 5.158424] ata1.00: status: { DRDY ERR }
[ 5.158927] ata1.00: error: { UNC }
[ 5.159621] ata1.00: supports DRM functions and may not be fully accessible
[ 5.159664] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
[ 5.159807] ata1.00: supports DRM functions and may not be fully accessible
[ 5.159838] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
[ 5.159842] ata1.00: configured for UDMA/133
[ 5.159852] ata1: EH complete
[ 5.197565] ata1.00: exception Emask 0x0 SAct 0x400000 SErr 0x0 action 0x0
[ 5.198119] ata1.00: irq_stat 0x40000008
[ 5.198680] ata1.00: failed command: READ FPDMA QUEUED
[ 5.199186] ata1.00: cmd 60/01:b0:e0:57:1c/00:00:1d:00:00/40 tag 22 ncq 512 in
res 41/40:00:e0:57:1c/00:00:1d:00:00/1d Emask 0x409 (media error) <F>
[ 5.200197] ata1.00: status: { DRDY ERR }
[ 5.200737] ata1.00: error: { UNC }
[ 5.201389] ata1.00: supports DRM functions and may not be fully accessible
[ 5.201453] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
[ 5.201607] ata1.00: supports DRM functions and may not be fully accessible
[ 5.201642] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
[ 5.201643] ata1.00: configured for UDMA/133
[ 5.201653] ata1: EH complete
[ 5.251557] ata1.00: exception Emask 0x0 SAct 0x200 SErr 0x0 action 0x0
[ 5.252124] ata1.00: irq_stat 0x40000008
[ 5.252675] ata1.00: failed command: READ FPDMA QUEUED
[ 5.253213] ata1.00: cmd 60/01:48:e0:57:1c/00:00:1d:00:00/40 tag 9 ncq 512 in
res 41/40:00:e0:57:1c/00:00:1d:00:00/1d Emask 0x409 (media error) <F>
[ 5.254405] ata1.00: status: { DRDY ERR }
[ 5.254928] ata1.00: error: { UNC }
[ 5.255591] ata1.00: supports DRM functions and may not be fully accessible
[ 5.255620] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
[ 5.255760] ata1.00: supports DRM functions and may not be fully accessible
[ 5.255788] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
[ 5.255790] ata1.00: configured for UDMA/133
[ 5.255801] ata1: EH complete
[ 5.275470] device-mapper: uevent: version 1.0.3
[ 5.275596] device-mapper: ioctl: 4.37.1-ioctl (2018-04-03) initialised: dm-devel@redhat.com
[ 5.318532] EXT4-fs (sdc1): mounted filesystem with ordered data mode. Opts: (null)
[ 5.370601] ata1.00: exception Emask 0x0 SAct 0x2 SErr 0x0 action 0x0
[ 5.371194] ata1.00: irq_stat 0x40000008
[ 5.371832] ata1.00: failed command: READ FPDMA QUEUED
[ 5.372401] ata1.00: cmd 60/08:08:e0:57:1c/00:00:1d:00:00/40 tag 1 ncq 4096 in
res 41/40:00:e0:57:1c/00:00:1d:00:00/1d Emask 0x409 (media error) <F>
[ 5.373542] ata1.00: status: { DRDY ERR }
[ 5.374138] ata1.00: error: { UNC }
[ 5.374848] ata1.00: supports DRM functions and may not be fully accessible
[ 5.374892] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
[ 5.375037] ata1.00: supports DRM functions and may not be fully accessible
[ 5.375066] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
[ 5.375068] ata1.00: configured for UDMA/133
[ 5.375084] ata1: EH complete
[ 5.441622] ata1.00: exception Emask 0x0 SAct 0x20 SErr 0x0 action 0x0
[ 5.442295] ata1.00: irq_stat 0x40000008
[ 5.442868] ata1.00: failed command: READ FPDMA QUEUED
[ 5.443428] ata1.00: cmd 60/08:28:e0:57:1c/00:00:1d:00:00/40 tag 5 ncq 4096 in
res 41/40:00:e0:57:1c/00:00:1d:00:00/1d Emask 0x409 (media error) <F>
[ 5.444526] ata1.00: status: { DRDY ERR }
[ 5.445065] ata1.00: error: { UNC }
[ 5.445729] ata1.00: supports DRM functions and may not be fully accessible
[ 5.445759] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
[ 5.445897] ata1.00: supports DRM functions and may not be fully accessible
[ 5.445924] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
[ 5.445925] ata1.00: configured for UDMA/133
[ 5.445933] Buffer I/O error on dev sda, logical block 61049596, async page read
[ 5.446590] ata1: EH complete
[ 6.009230] type=1305 audit(1638946940.830:3): audit_pid=737 old=0 auid=4294967295 ses=4294967295 res=1